SEER Rating: How much will I save with a higher SEER Rating?

HOW MUCH WILL I SAVE WITH A HIGHER SEER RATING

Most people know that higher SEER ratings for an air conditioner will save them money on their electric bills. But how much can you really expect to save with a higher SEER Rating? Let’s put some actual numbers behind this thought. So, stay tuned to find out how much savings you could see!

What is a SEER rating, and how does it work?

There are plenty of articles about what SEER ratings are for air conditioners and heat pumps, so I’m not going to dive into that topic. But, briefly, Trane.com says, “The SEER measures air conditioning cooling efficiency, which is calculated by the cooling output for a typical cooling season divided by the total electric energy input during the same time frame. A SEER rating is a maximum efficiency rating, like the miles per gallon for your car.”

What are the current SEER ratings seen today?

14, 15, 16, 17, 18, 19, and 20. Some of the heat pump systems that have come out since 2020 offer up to 25 SEER as well.

As of 2022, most states in America were mandated to install systems with a SEER rating of 14. Some northern states are still able to squeak by with 13 SEER systems because the summers aren’t as long and intense as they are in southern states.

How much money can I save by upgrading to a higher SEER rating air conditioner or heat pump system in my home?

The average cost of electricity in the summer here in Sacramento, CA, is around $0.247 per kWh. So, between 14 SEER and 20 SEER, you’ll save about 6-7% when you go from 14 to 15 to 16 all they way to 20 SEER. Take a look at these charts I made for you, considering a 3-ton system (36,000 btu’s) and you have a house around 1500 sq ft that is fairly well insulated in the attic and exterior walls:

SEER Rating How much will I save with a higher SEER Rating

I created a calculator with some formulas that customers can use to play around with these numbers too. You can find it here on foxfamilyhvac.com and I’ll leave a link to it in the description area of this video. Just give me a few weeks to get it posted on my website, since I just created it in July 2022.

Compared to your older 10 SEER system

Compared to your older 10 SEER system

A lot of systems that have been running since let’s say, 1995 to 2005 are probably running around 10 SEER. They may have started around 12 SEER, but systems lose efficiency through wear and tear over the years. So, most people agree their system is running around 10 SEER now as they are looking to buy a new system. Since 2010, the lowest SEER system we can install is 14 SEER. In 2023, it’s going up to 15 and 16 SEER-2, so we’ll update this blog when we get there. And yes, I meant to say SEER-2. Just the industry leaders and EPA mandating we get rid of the 14 SEER systems in order to make the 15 and 16 SEER systems the lowest SEER systems that we can install for customers.

Compared to your older 10 SEER system

So, with 14 SEER being the lowest, customers will also be offered options for higher-rated systems, like 15, 16, 17, 18, 19, and 20 – and yes, some systems are even higher. Let’s look at how much you might save by upgrading from your 10 SEER system to a modern 14, 16, 18, or 20 SEER system:

Compared to your older 10 SEER system (2)

So, you can see how upgrading your older 10 SEER system to pretty much anything today will save you money. Even $250 in savings each summer just by switching from an older system to a standard single-stage 14 SEER system sounds great! Upgrading to the 18 and 20 systems can save you double that each summer.  

Comparing the modern systems to each other

Now let’s compare 14 to 16, 16 to 18, and 18 to 20 SEER systems. Once again, these are numbers based on fairly well-insulated homes where the system is installed correctly, and the size of the system is right.

Comparing the modern systems to each other
Comparing the modern systems to each other

If you were given some options from your HVAC salesman – something like a 14 SEER, 16 SEER, an 18 SEER, and a 20 SEER system you might be thinking, “Well, what kind of savings would I get if I buy a 16 SEER over a 14 SEER system if the 16 SEER costs $1500.00 more?”

From the chart, you’d save about $79 a summer with a 16 over a 14 (At 24¢ per kWh)—a 13% savings. Over ten years, that’s $793, and assuming your system lasts a full 20 years, which is a good long life, you’d be looking at about $1587 in savings.

You can mess around with the SEER Comparison Calculator to get a good idea of what you’ll save here in California based of the average rate of 24¢ per kWh at summer rates.

What are the testing requirements to calculate SEER?

Real quick, the industry’s standard for testing includes a high-speed test at 95°F outdoor temp and another at 82°F. Two-stage and variable speed systems add a low-speed test at 82°F. Each of these tests is done for 30 minutes and is performed three times to get an average. I always thought they just calculated these numbers at high-speed, including the variable speed units that typically run at their lower speeds for longer periods of time.

There are way more considerations when calculating these SEER ratings. Some of the terms and testing they use are:

  • Voltage tolerance
  • Low temperature
  • Insulation efficiency
  • Condensate disposal
  • Maximum operation (115°F)
  • Extra high maximum operation (125°F)
  • Wet bulb
  • Dry bulb
  • Piping length
  • A proper refrigerant charge
  • Proper installation

Even just looking at some of the equations these guys use to determine the SEER ratings is crazy. Look at these!

the SEER ratings

And that’s just one calculation and the considerations for determining it. As I scroll down the page on the AHRI document, I have to use the roller to scroll 5 or 6 more times down the page to get to the end of this section!

In conclusion… how much will I save with a higher SEER Rating?

I thought this was a pretty interesting topic. So often, when people ask Google what SEER rating is, they’re just told – it’s a measurement of how much cooling effect they can get for the electricity used to cool the house. Like miles per gallon on a car. And it’s correct. But today, I wanted to put some numbers behind how much you can actually save when choosing between today’s modern air conditioners.

If this is your first time watching our channel, please click subscribe down here on the bottom right. And if you click that little bell next to it, you’ll be notified of all of our videos as they come out.

Thanks so much for watching, and we’ll see you on the next video!