11 Ways to Avoid Hot and Cold Spots in Your Home

Turning on the Furnace for the First Time Each Year

Delivering the right amount of air to each room at the same time is key to being comfortable.  And not just in one or two rooms.  A properly set up HVAC system will comfort your whole home or business simultaneously.

Of course, the goal is to have the same even temperatures throughout each room so when you walk through your house, you don’t feel warmer in one room than another.  Today at Fox Family Heating and Air, we’re taking a look at 11 ways to avoid hot and cold spots in your Sacramento Valley home or business.

1. Is your system sized correctly?

First and foremost, is your system sized correctly?  This means the original installer of the system did a proper load calculation of your home.  If they didn’t, then it’s not pushing enough air to your rooms regardless of whether the rest of our checklist is perfect.

2. Return air and supply air unity

Having the right amount of return air to supply air unity means you’ll be delivering the same amount of air out of your system as you are bringing to the system.  You have a return air grille or stand where your filter goes.  That’s where the system draws its air in.  On the other side of that air handler, the system supplies your conditioned air.  Systems are designed to supply about 400 to 500 cfms of air per ton.  But if your system is breathing in enough air from the return, how is it going to supply enough air to keep your home evenly comforted?

3. Adding returns will mix hot and cold air

This brings me to the option of adding more returns to strategic rooms around your house.  That return air grille in the main hallway doesn’t have to be the only return in the home or office.  For example, master bedrooms in newer homes have a return air grille installed in them.  This mixes the air in the room so warm air in the summer gets removed from the room, while colder supply air is being delivered into the room.  You’ll really notice a difference by adding a return to these pesky rooms that are warmer or cooler than others, depending on the season.

4. Closing air registers will force hot and cold air elsewhere

Not one of my favorites, but some folks will start closing down their adjustable supply registers in various room that get too much air.  They’re hoping to force the air somewhere else in the house that isn’t getting enough air.  The only thing I don’t like about this is that those registers that you start shutting down can do a couple things.  One is really annoying and the other can actually shorten the lifespan of the system.  Closing down “strategic” registers in the home or office can make those registers start whizzing.  This makes it louder in that room because we are creating a restriction that speeds up the airflow as it leaves the supply register.

The other reason has to do with the static pressure of the system.  Much like blood flow in the body, we wouldn’t want to pinch a blood vessel in hopes to deliver more blood elsewhere right, this could cause big problems with the body.  The same goes for aerodynamics in your ductwork.

5. Change those filters to eliminate hot and cold spots

Changing your filters quarterly will not only help keep your system clean, but it will allow airflow into the system.  If the filter gets too dirty, you’re creating a restriction if the system can’t breathe in properly, it won’t be able to breathe out the appropriate amount of air.  It’s like breathing in through a straw and exhaling out of your open mouth.  Eventually you’re going to hyperventilate.  So, let’s keep those passages open so the HVAC system can eliminate hot and cold spots in your home or office.

6. Keep Heat at Bay with Window Coverings

The sun’s radiant energy can warm up a room quickly.  A room with sun-drenched walls or windows allow this heat into those rooms and will warm up more quickly.  Installing window coverings will keep this radiant heat at bay.  These come in the form of screens or tinting that can be attached to the outside of windows, or curtains and blinds affixed to the inside of the windows.  Either way you choose, you’re going to enjoy having a more comfortable room if you can reduce the chance of that heat coming in this way.

7. Electronics in Rooms will Increase Warmth

It’s so popular now to have gaming systems or high-tech computer systems in a room or office.  The heat these devices put out is enough to warm up a room, making it less comfortable than other rooms in your house.  Adding more supply air by using a larger duct will help to deliver more air to that room.  Just like I mentioned above, a better solution may be adding a return to this room as it will remove the warm air while cold air is being supplied to the room.  This will make your room more comfortable, faster.

8. Ceiling Fans will Mix Hot and Cold Air

Another way to mix the air in your room is to turn on that ceiling fan.  When it’s hot outside, have the fan blowing straight down towards the floor.  The warmer it is, the higher the fan speed should be.  Conversely, in the wintertime, turn the fan so it blows upwards.  Both ways will mix the air more effectively and make those rooms more evenly comforted.

9. Keep Hot and Cold Air Moving by Preventing Airflow Restrictions

Remove hot and cold air spots by taking a look at your ductwork.  It might be under the house or in the attic.  If you can see your ductwork, you will be able to determine if it’s delivering the air efficiently.  If the ductwork is sagging or kinked, it won’t deliver the air properly.  Each duct has a finite amount of air it can deliver appropriately.  Making sure it is installed correctly is a great way to keep your house evenly conditioned.

10. Prevent Hot and Cold Spots by Checking Insulation Levels

You can also control hot and cold spots by paying attention to insulation.  Attic insulations levels can greatly impact how quickly that hot or cold air infiltrates through the ceiling into your room.  Sometimes various service professionals will need to work up there.  In the process, they may matte down some of your insulation, making it less effective.  If there is not enough insulation over one room or the other, this will create hot or cold spots.  These reduce your comfort level in those rooms.  By blowing in some more insulation, you can make your whole house more comfortable to be in.

11. Properly Sized Ductwork Improves HVAC Efficiency

The size of your HVAC system as well as the right size duct system to deliver that air evenly are both crucial to your comfort.  This isn’t the easiest thing to figure for most DIY’ers.  An hvac professional can help you determine what size duct is needed for each room.  A system of supply and return ducts running every which way can be confusing.  Making the right decisions with your ductwork will make your HVAC system more efficient and comfortable for your home.  This will eliminate hot and cold spots in your home

Summary

Let Fox Family come out and take a look at what can be done to make your home more comfortable if you’re experiencing hot or cold spots.  Making your system as efficient and effective as possible will certainly add to your quality of life.

Thanks so much for stopping by, and we’ll see you on the next blog post!

Don’t miss our videos on related topics:

HVAC Zoning Basics - Bypass Dampers Dump Zones

 

Benefits of HVAC Zoning

Have you heard about HVAC zoning?  Wondering if it would be worth it to retrofit your heating and cooling system with a zone control system? Read on and discover some of the key benefits which technicians at Fox Family Heating and Air attribute to zoning the HVAC system in your residential or commercial property.

Enhanced Comfort

The primary reason why HVAC systems are installed is to give building occupants comfort. HVAC zoning takes this comfort to a higher level. This is because every zone or section of the building can have its temperature controlled independently. For example, the rooms upstairs may be warmer than those on the ground floor. HVAC zoning allows the people upstairs to lower the thermostat settings without causing any inconveniences to those downstairs who don’t want that lower temperature.

Reduced Energy Consumption

HVAC zoning also reduces the amount of energy which is used to cool or heat the premises. These energy savings arise due to the adjustments made for each zone based on the needs of the occupants. For example, you can increase the heating to the bedrooms upstairs during the cold months while reducing the heating downstairs since no one will be in the living room or kitchen at night. You’ll get energy savings by not heating unoccupied rooms downstairs.

If all the lights in your home were controlled by one switch, you’d get similar results. Such a situation forces you to leave lights on in the unoccupied rooms, wasting energy. Zoning prevents such wastage. These energy savings can even offset the investment you made to your Sacramento heating and air conditioning company to install HVAC zoning in your premises.

Convenience

More convenience is another benefit of HVAC zoning.  You may need to walk downstairs in the middle of the night to adjust the settings of the thermostat. With heating, cooling and air conditioning controlled from a central location, buildings without HVAC zoning will come with such inconveniences.

Zoning brings convenience since the thermostats of the different zones will be located within those zones. Consequently, you will take a shorter walk to adjust the settings on the thermostat regulating the conditions in the affected room.

Prolonged Equipment Life

Your HVAC equipment is likely to experience less wear and tear if you installed a zoning system. This is because there will be few occasions when the system will be operating at full capacity. For example, the bedrooms may require less heating or cooling during the day.  This is when most activities in the home take place in the living room and the kitchen. Similarly, the living room and kitchen will require less heating or cooling at night while you sleep. This phased demand for heating or cooling allows the HVAC system to operate at less than full capacity during most hours of the day. You will, therefore, have a reduced need to pay for air conditioner repair (Sacramento).

As you can see, HVAC zoning will enhance the value you get from your heating or cooling system. However, those benefits can only come if the zoning system is installed correctly by an experienced professional, such as those at Fox Family Heating and Air.  Get a professional assessment of your requirements before choosing the best HVAC zoning system for your home.

Why is My AC Overheating?

my A/C has a refrigerant leak

[mk_page_section full_width=”true” top_shape_color=”#ffffff” top_shape_bg_color=”#ed4622″ bottom_shape_color=”#ffffff” sidebar=”sidebar-1″][vc_column][mk_padding_divider][mk_fancy_title size=”32″ font_family=”none” align=”center”]Why is My AC Overheating?[/mk_fancy_title][vc_row_inner][vc_column_inner width=”1/6″][/vc_column_inner][vc_column_inner width=”2/3″][vc_column_text css=”.vc_custom_1535571972071{margin-bottom: 0px !important;}”]The compressor is one of the most important (and expensive) components of your air conditioner. This crucial component can sustain irreparable damage in case it overheats, and the cause isn’t identified and fixed quickly. This article discusses some of the reasons given by a leading Sacramento heating and air conditioning company, Fox Family Heating and Air, to explain why your AC compressor is overheating.

Electrical Issues

Any defect in the electrical supply can cause the compressor to overheat. For example, a spike in the power supply to your Sacramento home will trigger overheating in the sensitive electrical components of the compressor. Loose connections and compromised insulation can also cause overheating in the compressor. Air conditioner repair professionals in Sacramento can fix this problem before it causes your AC to stall.

Blocked Suction Lines

The compressor of the AC may overheat in case something has constricted the refrigerant line from the indoor unit. This constriction will prevent the refrigerant from flowing at the right pressure and volume as it gets into the compressor. The compressor is therefore likely to overheat as it tries to compensate for that low pressure by sucking harder on the refrigerant.

Dirty Condenser Fins.

The fins on the condenser help to dissipate the heat carried by the refrigerant when it leaves the compressor. This heat may not be lost fully in case those fins are caked by dirt. Consequently, the refrigerant will go back to the evaporator when it isn’t as cool as it should be. The net result is that the refrigerant will be further heated by the warm air in your home and that excessively hot refrigerant will cause the compressor to overheat. Technicians at Fox Family Heating and Air warn that such a problem can cause the compressor to fail and require replacement.

Poorly Sized Refrigerant Lines

The compressor can also overheat in case the refrigerant lines are either too small or too wide. This improper sizing may cause the compressor to overheat as it works overtime to compensate and keep the refrigerant at the required pressure. Get an experienced air conditioner replacement (Sacramento) technician to inspect the AC in case it recently underwent repairs, and you suspect that the wrong refrigerant line was used.

Incorrect Cycling

Oversized or undersized AC units can also cause the compressor to overheat. For example, an undersized AC will stay on for very long to keep the temperature in your Sacramento home at the desired level. This strains all the components, especially the compressor. Overheating becomes inevitable in such situations.

Conversely, an oversized unit will start and stop more times than is usual for a correctly sized unit. These short cycle times also cause overheating because the compressor strains a lot as it is starting up. Contact a Sacramento air conditioning company for help in replacing that oversized or undersized AC.

Insufficient Refrigerant

A refrigerant leak can leave your AC with less refrigerant than is required. Inadequate recharging after air conditioner repairs can also leave the system low on refrigerant. Low refrigerant levels cause the compressor to overheat because the AC will work harder to cool your home. This situation needs to be corrected urgently before it causes a total breakdown of the compressor.

Contaminants

The compressor of your air conditioner is also likely to overheat in case contaminants, such as particulates and other gases, find their way into the refrigerant. Those contaminants are harmful because they prevent the compressor from compressing the refrigerant as it usually does. Insufficient compression strains the compressor and causes it to overheat.

Old Age

The AC may overheat due to age-related wear and tear. The increasing inefficiency of the aging air conditioner makes the compressor to overheat as it tries to keep up with the demands placed upon it during the cooling season of the year. This is particularly common in ACs which have been in use for more than ten years. Such units should be replaced instead of trying to pay attention to the compressor alone.

Although the causes of overheating in an air conditioner compressor seem unrelated, only one measure can keep most of them at bay. Proper maintenance can prevent many of the reasons why compressors overheat. Negotiate an AC service contract with the experts at Fox Family Heating and Air so that your air conditioner is kept working at its best for its entire service life.[/vc_column_text][mk_padding_divider][/vc_column_inner][vc_column_inner width=”1/6″][/vc_column_inner][/vc_row_inner][/vc_column][/mk_page_section][mk_page_section bg_color=”#ed4622″ full_width=”true” has_top_shape_divider=”true” top_shape_color=”#ffffff” top_shape_bg_color=”#ed4622″ bottom_shape_color=”#ffffff” sidebar=”sidebar-1″][vc_column width=”2/3″][mk_padding_divider][mk_fancy_title tag_name=”h3″ color=”#ed4622″ size=”36″ force_font_size=”true” size_tablet=”20″ size_phone=”15″ line_height=”90″ font_weight=”bold” txt_transform=”capitalize” margin_bottom=”0″ font_family=”Lato” font_type=”google” align=”right” drop_shadow=”true”]Need Service? Call Now: 916-877-1577[/mk_fancy_title][/vc_column][vc_column width=”1/3″][mk_padding_divider][mk_button dimension=”flat” size=”large” align=”center” margin_right=”0″ bg_color=”#0066cc” btn_hover_txt_color=”#ed4622″]BOOK NOW[/mk_button][/vc_column][/mk_page_section]