Gas package units are a bundled heater and air conditioner in one fairly large unit outside. These are usually found on the rooftop, which is why they’re sometimes called rooftop units, or RTUs.
If your HVAC system doesn’t have an indoor furnace or air handler, chances are, you have a rooftop package. If you get your heat from natural gas or LP instead of just electricity, you have a gas package unit.
A smart solution to your home heating and cooling needs, the XR13.4c is an excellent blend of efficiency and value.
A XR13.4c SEER2 rating cools your home and can lower cooling costs even on the hottest days.
The Trane XR13.4c gas/electric system features a stainless steel heat exchanger combined with an efficient air conditioner. So no matter how cold or warm the weather, your home will be perfectly comfortable.
- Cooling Stages: Single-Stage
- Heating Stages: Single-Stage at 81% AFUE
- Energy Star Rated: No
- Climatuff™ compressor
- State-of the-art fan system
- Composite Vortica™ blower
- Stainless steel heat exchanger and burners
- All-aluminum Spine-Fin™ coil
- Durable Weather-Beater™ top
- Rugged all-steel cabinet
The XL15c package heating and cooling system combines a high-efficiency air conditioner with a variable-speed gas furnace, maximizing your comfort from summer to winter and back. And it’s all contained in one sleek cabinet.
Two-Stage systems have a 70% speed in first -stage and 100% speed in second-stage. This system will run in first stage the majority of the time saving you so much more than your old single stage system.
- Cooling Stages: Two-Stage
- Heating Stages: Two-Stage at 81% AFUE
- Energy Star Rated: Yes
- Two-stage Climatuff™ compressor
- State-of the-art fan system
- Composite Vortica™ blower
- Stainless steel heat exchanger and burners
- All-aluminum Spine-Fin™ coil
- Durable Weather-Beater™ top
- Two-Stage gas valve
- Variable-speed blower motor with Comfort-R™
- The proper building permit
- Title 24 Testing - (Airflow, Duct Leakage, Refrigerant Charge Tests)
- Removing and disposing of the existing system
- Crane service
- Modifying the existing supply plenum
- Modifying the existing return plenum
- Reconnecting the existing ductwork
- A new gas-flex and safety shut-off
- A new Honeywell 9000 WiFi/Smart Thermostat
- The proper breaker at the main electrical panel
- A new high voltage service disconnect and wiring from the disconnect to the unit
- Adjusting the gas heating pressures
- A precision refrigerant charge
- New smoke detectors and CO monitors (as needed)
- Complete clean up
2 Years Preventive
Maintenance
We’ll come out twice a year for the first two years, once in the spring/summer, and once in the fall/winter to test and clean your new system and keep it running in top shape. Nothing is due when we come out for this service.
Compressor
Start Kit
This will extend the life of your new system by taking some of the load off of starting the system up thousands of times over its lifespan.
- 10 Years Parts Warranty
- 10 Years Compressor Warranty (12 Years on the XL15c)
- 20 Years Heat Exchanger Warranty
- 2 Years Labor Warranty
- 2 Years Preventive Maintenance – To receive a full 10 years labor warranty, just continue your paid maintenance with us from years 3 through 10 and pay nothing for any repairs for the first 10 years
Subsequent owner warranty will reduce to 5 years parts/compressor from date of install. Subsequent owners will not have the extended labor warranty option available
- How much can you save between your current SEER system vs one a newer one?
- How much can you save between a 14 SEER and a 17 SEER?
- California’s averages about $0.25 per kWh, but you can adjust the rate if desired.
Why We Recommend Trane HVAC For Your Family
Fox Family Heating & Air and Trane Technologies have been partners since 2015. The reason we recommend Trane equipment in your home all comes down to this. We repair Trane systems way less than any other brand on the market.
Click below for more reasons we choose Trane HVAC.