Preparing Your Furnace for Fall

 In Furnace maintenance

Preparing Your Furnace for Fall

Preparing Your Furnace for Fall

The onset of fall or winter triggers an avalanche of calls to Fox Family Heating and Air to address furnace issues. While furnace problems are at times inevitable, many of those issues can be prevented. Read on and discover some of the ways through which furnace maintenance can avert many of the potential problems during the heating season (fall and winter).

Replacing Dirty Filters

Dirty furnace filters can cause airflow issues around the home. This will become apparent once the entire home or parts of it aren’t getting enough heat even if the furnace is working. You can prevent such furnace problems by checking and replacing the filter once you find that it clogged. The filter can be located in the air inlet or within the furnace itself. Refer to the user manual and perform this crucial preventive maintenance activity. HVAC filter replacement is a routine task conducted by Sacramento heating and air conditioning companies during scheduled HVAC maintenance visits.

Fixing Unusual Pilot Light Functioning

The pilot light or furnace ignition can flicker or change color to yellow. This may be an indication that exhaust gases, such as carbon monoxide, have accumulated within your furnace. Could there be a blockage in the exhaust vent? Check whether the fan is working as it should. Ask for professional help in case you cannot immediately identify why the pilot light is flickering or appears yellow.

Stop Frequent Cycling

You can also prevent the furnace from cycling on and off at short intervals by prepping your furnace for fall. Confirm that the settings of the thermostat are correct. Incorrect settings (settings close to the ambient temperature, for example) may cause this frequent cycling. Airflow problems or clogged filters could also trigger frequent cycling. Call an expert from Fox Family Heating and Air if the frequent cycling doesn’t end once you implement the DIY fixes suggested.

Prevent Blower Belt Malfunctions

The blower belt can become frayed or it could slip. This can trigger an unusual sound in the furnace. Heated air may also fail to move around the home since the blower won’t be able to do its work of passing air over the heat exchanger. Have the blower belt checked as summer is coming to an end so that the furnace will be ready for the demands of fall and winter. Contact a Sacramento heating and air conditioning repair company for help if the blower develops a defect suddenly after the onset of fall.

Ensure Sufficient Clearance

Another way to prepare your furnace for fall is to inspect the area around it and remove any objects preventing airflow around the unit. This step is important in case you store belongings within the same location as the furnace during the months when the furnace isn’t needed. Remove everything that is within the clearance radius recommended by the manufacturer of that unit. This simple undertaking will avert those problems which originate from a congested space around the furnace.

Troubleshoot Electrical Component Issues

The limit switch can fail. Worn wiring can also cause the furnace breaker to trip. It is advisable to ask a professional to inspect the furnace before fall so that any defective electrical components can be repaired before they affect the performance of the furnace during the colder months of the year.

As you can see, you can perform some of the activities needed to make the furnace ready for fall. However, it is best to ask an expert from Fox Family Heating and Air to service the furnace so that it performs reliably and efficiently throughout fall and winter.

Need Service? Call Now: 916-877-1577

Recommended Posts
Contact Us!

We do our best to treat your website inquiries like an incoming phone call or a text.

Not readable? Change text. captcha txt
Average Cost of Furnace Repair